分分时时彩

  • 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.antivirusya.com
分分时时彩当前位置:分分时时彩-分分时时彩
    无框玻璃门的安装要点!
    来源:http://www.antivirusya.com   时间:2019-8-19 20:44:27
    无框玻璃门是现在应用非常广泛的一种,下面济南玻璃门的小编就给大家总结一下无框玻璃门的安装要点,希望对大家有所帮助!
    Frameless glass doors are widely used nowadays. The following edition of Jinan glass doors summarizes the installation points of frameless glass doors, hoping to help you!
    1、在所有的安装步骤开始之前,必须要确保在室内装修装饰的其他工序都施工基本结束后才能进行,而且在放线定位时要严格按照设计图纸要求进行。
    1. Before all installation steps begin, it is necessary to ensure that all other processes of interior decoration can be completed after the completion of construction, and the layout and positioning should be carried out strictly in accordance with the requirements of the design drawings.
    2、无框玻璃门门框顶部限位槽的宽度应大于玻璃厚度2~4mm,槽深在20~30mm之间,以便注胶。

    2。 The width of the limit groove on the top of the frameless glass door frame should be larger than that of the glass thickness of 2-4 mm, and the groove depth should be between 20-30 mm for injection。

    济南玻璃门

    3、在外包金属装饰面时,要把饰面对头接缝放置在安装玻璃的两侧中间位置。接缝位置必须准确并保证垂直。
    3. When wrapping the metal decorative surface, place the decorative head seam in the middle of both sides of the installation glass. The seam position must be accurate and vertical.
    4、在安装无框玻璃门的玻璃门扇时的就位方法是:应把玻璃上部插入门框顶部的限位槽内,然后把玻璃的下部放到底托上对正中心线,并对好两侧门框的安装位置,使厚玻璃的两侧边部正好封住门框的金属饰面对缝口,要求做到内外都看不见饰面接缝口。
    4. When installing glass doors with frameless glass doors, the positioning method is to insert the upper part of the glass into the slot at the top of the door frame, then place the lower part of the glass on the bottom bracket to the center line, and fix the installation position of the door frames on both sides, so that the metal decoration of the door frame is just sealed against the seam on both sides of the thick glass. No decorative seams can be seen inside or outside.
    5、在注玻璃胶封口时,注入顺序应从某一条缝隙的端头开始到末端终止,中途不得停顿。
    5. When sealing with glass injection glue, the injection sequence should start from the end of a slot to the end, without stopping halfway.
    6、在进行无框玻璃门的玻璃之间对接过程中,对接缝的玻璃切口必须倒用,并且在玻璃固定后,要用玻璃胶入缝隙中,注满后同样要用塑料片把胶刮平,使缝隙形成一条洁净的均匀直线,玻璃面上要用干净布擦净胶迹。
    6. In the process of docking between glass doors without frames, the glass incision of the docking seam must be reversed. After fixing the glass, the glass should be glued into the crevice. After filling, the plastic sheet should also be used to scrape the crevice flat so as to form a clean uniform straight line, and the glass surface should be cleaned with a clean cloth.
    好了,今天的精彩内容就先给大家介绍到这里了!济南玻璃门的小编会定期为大家整理发布一些行业信息,欢迎大家收藏我们的网站:http://www.antivirusya.com
    Well, today's wonderful content will be introduced to you here first! The editorial board of Jinan Glass Gate regularly organizes and publishes some industry information for you. Welcome to collect our website: http://www.antivirusya.com.
一分时时彩 一分时时彩 快乐时时彩 快乐时时彩 分分时时彩 分分时时彩 分分时时彩 快乐时时彩APP 一分时时彩 快乐时时彩